Skip to Navigation | View regular site

Page content

Hammers

Hammers have been used for thousand of years to drive nails and wooden pins, to pound together wooden parts, and to position fittings like barrel hoops. Eighteenth-century toolmakers produced many types of hammers.

Specialized hammers of many types were made for particular jobs. Different sizes and designs suited them for tasks ranging from delicately driving in brads to secure small moldings to pounding home the large wooden pegs used to hold together building and ship frames.

claw hammer

Claw hammers were common. Like many hammers, they were dual-purpose tools. The face was used to drive nails, while the claw was used to pull them.

riveting hammer head

The peens of riveting hammers were used to spread the ends of rivets or to drive brads in tight spaces.

cooper's adze

Coopers' adzes had an adze blade on one side and a hammer head for driving hoops on the other.

shipbuilder's pin maul head

Shipbuilders' pin mauls were used to drive and countersink spikes and wooden pins.

upholstery hammery

Upholsters' hammers had long heads and claws for driving and pulling tacks in hard-to-reach places.

lathing hammer

Lathing hammers had a blade for splitting and cutting lath (wooden strips over which plaster was laid) and a hammer for nailing it into place.

mallet

Mallets and Clubs: Wooden hammers were used to strike tools such as froes, wedges, or chisels that would be damaged if hit with a metal hammer. They also were used to drive wooden joints together. Small wooden hammers were called mallets. Larger ones were called clubs, mauls, or beetles.


Footer
 

1-855-756-9516

Quicklinks
Webcams | Podcasts | What’s New | Video

Colonial Williamsburg’s Websites
LEARN www.history.org
VISIT www.colonialwilliamsburg.com
SHOP www.williamsburgmarketplace.com
REVOLUTION www.ouramericanrevolution.org
EDUCATION www.ideaofamerica.org
CITIZENSHIP www.icitizenforum.org

©2014 The Colonial Williamsburg Foundation
Contact | Privacy | View regular site